Filter
Top Products
C Oven Care and Use ManualOven Features
Page 7
Interpreting the Control Panel: Sights & Sounds
The directions in the Care and Use Manual for setting the oven and its various modes are based on the
assumption that the panel displays and sounds will “lead” or help you set the controls easily. To aid in this
path the following descriptions provide a basis for interpreting what is seen and heard.
Flashing Symbols or Numbers
Signals an incomplete setting; calls for another step or
START to be touched.
I Beep
Signals the receipt of an entry.
2 Beeps
Signal an error in entry.
4 Chimes
Signal the end of a setting.
Probe Symbol
Displays the internal temperature of the meat rather
than the oven roasting temperature.
Oven tempera-
ture can be seen briefly by touching the cook mode
after touching START.
Lock Symbol
Displays during the Microwave, CookSmart, and Self
Clean modes whenever the door is locked. Door can
be opened when symbol no longer appears.
PAU
Displays when a Microwave or Cooksmart program is
paused or interrupted and door unlocks.
Err
Displays if an invalid temperature or time is entered.
Power Failure
After the power returns to the oven, the clock displays
the time when the power was lost or turned off.
UPPER
LOWER
(Double oven models only) Selects the
active oven to be set by highlighting the
oven in the mode display window.
Default Settings
The cooking modes automatically select a suitable
temperature. These can be changed when a different
one is needed.
START
Touch to complete an entry and before entering an
additional one.
UPPER OFF and LOWER OFF
Touch to cancel a mode that has already been started
or completed.
COOK TIME
Sets the number of hours and minutes the oven will be
“on”. Unlike Timer 1 or 2, the oven turns “off” auto-
matically when the time elapses. This pad is used with
the automatic timed oven control.
F Number Codes
These codes are displayed when there is a problem with
the signal sent to the electronic control board. See Solv-
ing Operational Problems, Page 36.
Convection Fan
Operates during any convection mode. The fan turns
off if the door is opened.
Component Cooling Fan
Activates during any cooking or self-cleaning mode to
cool inner components and outer door surfaces. This
air is exhausted through the vent located below the
lower oven in double oven models. It continues to run
until components have cooled sufficiently.
120/208 Volt Connection
• Preheat the oven for all cooking modes.
Preheat time will be slightly longer.
• Preheat the broil element with the door open
for 3 to 4 minutes or until the top element is
red. Do not preheat with the broil pan in the
oven.
• The Self-Clean mode may need a longer clean
time than normal, depending on the amount
of soil.