Filter
Top Products
6
Loading the Top Rack
Figure 7
shows how
to arrange
items from
a typical
10 place
setting in
the top rack.
Figure 8 shows
the top rack
load pattern
for 12 place
settings.
Figure 8
(AHAM DW-1 12 Place Setting)
Preparing and Loading the Dishware (continued)
NOTE: When pushing the top rack into the
dishwasher, push it until it stops against the back
of the tub. Otherwise, the top rack spray arm may
not connect to the water supply.
Figure 6 shows
how to arrange
a typical mixed
load in the
top rack.
Bottom Rack Features
Flip Tines
Flip Tines fold down to make loading the racks
easier in some instances.
Grasp the
tines
as shown
in Figure 9
and fold
the tines
downward.
Top Rack Features
Knife Rack
The knife rack is an extra shelf for knives and
other large utensils. It is assembled onto an edge
of the upper rack.
Place knives
with sharp
sides down,
see Fig. 5.
Figure 7
(AHAM DW-1 10 Place Setting)
Rack Attachment
The rack attachment has two additional cup
shelves upon which to place cups and large
kitchen utensils. The rack attachment is as-
sembled on the rear edge of the lower rack.
Figure 6
Figure 9
Figure 5