Filter
Top Products
PAGE 9
REPLACING THE BULBS
1. Switch off the extractor hood and pull out the mains
plug or switch off the electricity supply at the fuse box.
ṇ When switched on, the halogen bulbs become very
hot. Even for some time after the bulbs have been
switched off there is still a risk of burns.
2. Remove the bulb ring with a screwdriver or similar tool.
3. Replace the halogen light bulb (conventional halogen
bulb, 12 Volt, max. 20 Watt, G4 bulbholder).
Caution: Plug-in bulbholder.
Take hold of the bulb with a clean cloth.
4. Re-insert the bulb ring.
5. Restore the power by inserting the mains plug or
switching on the fuse.
Note: If the light does not function, check that the bulbs
have been inserted correctly.