Filter
Top Products
How to Vacuum Package Using FoodSaver Bulk
Storage Canisters and Square Canisters
How to Vacuum Package Using FoodSaver
Designer Canisters
THE FOODSAVER USER MANUAL
15
Bulk Storage Canisters are an excellent way to store food in the
refrigerator or pantry. The Square Canister is great for marinating
since vacuum packaging opens the pores of food and cuts
marinating time down to 20 minutes. They both operate the
same way.
1
Place the items(s) to be vacuum packaged inside the canister.
Leave at least one inch between the contents and the rim of
the canister.
2 Turn the knob on the lid so the
arrow points to “Vacuum.”
3 Place lid on top of Bulk or Square
Canister.
4 Insert one end of the Accessory
Hose into the Accessory Port on
the machine. Insert the other end
of the Accessory Hose into the
hole on the top of the canister.
Twist the gray hose fitting while
inserting to ensure a tight fit.
5 Set the Sealing Time Adjustment Switch to “1.”
Vacuum package as per instructions on page 10, steps 5-7.
THE FOODSAVER USER MANUAL
14
FoodSaver Designer Canisters are an excellent way to store
delicate items in the refrigerator, pantry or on the countertop.
1 Place the item(s) to be vacuum packaged inside the canister. Leave
at least one inch between the contents and the rim of the canister.
3 Place the lid on top of the canister.
4 Insert one end of the Accessory
Hose into the Accessory Port on
the appliance. Insert the other
end of the Accessory Hose into
the hole on the top of the canister.
Twist the gray hose fitting while
inserting to ensure a tight fit.
5 Set the Sealing Time Adjustment
Switch to “1.” Vacuum package
as per instructions on page 10,
steps 5-7.
6 Remove the Accessory Hose
from the lid by gently twisting
the gray hose fitting and pulling up.
How to Open the FoodSaver Designer Canister
To open the FoodSaver Designer Canister, press and hold the
gray rubber button in the center of the lid. This will release
the vacuum and allow the lid to be removed.
MPORTANT: Remember to remove the Accessory Hose from the
Accessory Port on the appliance before you vacuum package in
FoodSaver Bags. Remove the hose by gently twisting the gray
fitting while pulling it out. Never yank or tug the hose as this
may damage both the hose and the fitting.