Filter
Top Products
BEFORE FIRST USE
1. Remove all packaging.
2. Turn the Cover counterclockwise and remove.
3. Turn the Grinding Bowl counterclockwise and remove.
4. Wash both pieces in warm soapy water. Rinse and dry.
IMPORTANT: Be careful when wiping out the Grinding Chamber
Bowl, the blade is very sharp.
5. Follow the instructions in the Care and Cleaning section to reassemble the
appliance.
HOW TO USE
1. Turn the Cover counterclockwise and remove.
2. Ensure that the Grinding Bowl is empty and clean then pour whole coffee
beans into the Grinding Bowl and fill to the desired level. (NOTE: The cup
measurements are marked on the inside of the Grinding Bowl. The
minimum is the 2 cup level, maximum is the 12 cup level. NEVER fill above
the MAX level). Do not exceed 90g or 3.1 oz of coffee beans.
3. Place the Grinding Bowl and the Cover on the appliance. See the assembly
instructions in the Care and Cleaning section. NOTE: The Coffee Grinder
will not operate if the Cover and Grinding Bowl are not in the locked position.
4. Turn the Grind Selector Knob to the desired setting, coarse to fine.
5. Choose the desired number of cups on the timer.
6. Plug the Grinder into the wall outlet and press the Start button. Release
the Button when the grinding has begun and the Grinder will stop
automatically when the grinding is complete.
NOTE: To stop the grinding cycle at any time, push the Start Button. If the
Start Button is pressed again, the Grinder will start from the beginning of
the timed cycle.
IMPORTANT: Do not remove the Cover until the blades have stopped moving.
7. Remove the plug from the wall outlet.
8. Remove the Cover by turning counterclockwise.
9. Turn the Grinding Bowl counterclockwise and remove. You will hear
a click when the Grinding Bowl is unlocked.
4
Booklet_DLCG-559_ENG:Salton Booklet 6/11/09 2:07 PM Page 4