Filter
Top Products
1. Place the Slow Cooker on a dry level surface. Add recipe ingredients
to the Ceramic Casserole and cover with Lid. Place Ceramic Casserole
in Slow Cooker base.
2. Plug unit into the wall outlet. The digital display will flash “- - - -“.
3. Press the Temperature Button to select Low, High or Warm. (Press once
for High, twice for Low, 3 times for Warm and 4 times for Stand Time.)
The default setting of 6 hours (6:00) will be shown in the Digital Display
if you have selected Low, High or Warm. Nothing will be shown in
the Digital Display if you have chosen “Stand Time”. After 3 seconds
the Indicator Light will illuminate beside High, Low or Warm, depending
on your selected setting.
4. Set the required amount of time by pressing the “Cook Time” Button.
Each time you press the Cook Time Button the time will increase
by 30 minutes, to a maximum of 10 hours. If you don’t press the Cook
Time Button for 3 seconds the cooking time will be the time showing
in the Display Window.
NOTE: If you would prefer less cooking time than the default setting
of 6 hours, continue to press the Cook Time Button past 10 hours and
the Cook Time will display 30 minutes. Press to increase the time
by 30 minute increments.
5. Once the Cooking Time is finished, the unit will switch to “Stand Time”
mode for 10 minutes. The Digital Display will countdown the 10 minute
Stand Time then will automatically switch to Warm. The default time
of the Warm cycle is 10 hours.
6. Once the 10 hours has elapsed, the slow cooker automatically switches
to Stand Time. The indicator lights will go out and the Digital Display
shows “-----“. Unplug the Slow Cooker from the wall outlet.
NOTE: To stop heating during the cooking process, press the Temperature
Button until the remaining cooking time blinks in the Digital Display and
the Indicator Light goes out. Wait 5 seconds and the unit will switch
to the Stand-Time cycle and the Digital Display blinks “- - - -“. Unplug
the Slow Cooker.
6
Booklet Eng Page 6