Filter
Top Products
5.
4. Invert container onto level countertop and assemble cutting assembly
onto bottom of the container, making sure they are securely
tightened into place, see FIGURE 2. Insert container until it fits
securely into the blender motor base, aligning the notches and
grooves, see FIGURE 3. Turn clockwise to lock.
5. Place food into container and cover with the lid assembly by turning
counter-clockwise until locked into position, see FIGURE 4. Always
hold onto container while blending. See DO and DO NOT
instructions before using.
CAUTION: DO NOT ATTEMPT TO OPERATE WITHOUT
LOCKING RING, BLADES, GASKET, CONTAINER LID, AND LID
INSERT PROPERLY IN PLACE.
6. Plug unit into 120 V ~ 60 Hz a.c. outlet.
7. To start the blender, turn the speed control knob clockwise to
any speed (1-7). Press the PULSE button to boost the speed at
any time. Note To use the “PULSE” action only, turn the speed control
knob to OFF and press the pulse button for a few seconds. Release and
repeat as necessary. The “PULSE” may be used for such food items as
crumbling crackers, grating cheese or chopping vegetables.
8. Turn knob to OFF position to stop action. Wait until blades stop
rotating.
9. Unplug the appliance before removing container from the
blender motor base.
10. Grasp container handle, turn container counter-clockwise and lift
off of blender motor base. Remove lid assembly. Pour processed
food out of the container. Unscrew locking ring from container
and carefully remove cutting unit assembly. Note: To serve beverages
from the container, you may turn the lid assembly clockwise until it locks
into place. This will position strainer above the pour spout.
CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY.