Filter
Top Products
6
USER MAINTENANCE
INSTRUCTIONS
This Warming Tray requires little maintenance. It contains no user serv-
iceable parts. Do not try to repair it yourself. Any servicing requiring dis-
assembly other than cleaning must be performed by a qualified appli-
ance repair technician.
CAUTION: Do not immerse Warming Tray, Cord or Plug in water or
other liquid.
Care and Cleaning
1. First unplug the appliance from the wall outlet; then detach the
power cord from the unit. ALLOW ALL PARTS TO COOL COM-
PLETELY BEFORE CLEANING.
2. Once the Warming Tray has cooled completely, use a sponge or
cloth moistened with any mild household detergent to clean the
glass surface and plastic Stay-Cool Handles.
CAUTION: Do not use scouring pads or harsh or abrasive
cleansers to clean the glass Warming Plate. These could
scratch the Warming Plate surface.
NOTE: Glass cleaner may be used on the Warming Plate surface
to remove detergent streaks and to enhance shine.
5. Slide the Temperature Control
to the desired temperature set-
ting (see FIGURE 2). Surface
temperature will range from
approximately 180°F/82°C (
.),
to 300°F/149°C (...).
NOTE: The correct tempera-
ture setting will vary depending
on the food and type of dish-
ware being used.
Using the “Hot-Spot” :
This is the area within the red circle on the
Warming Plate. The “Hot-Spot” circle is approximately 40°F/22°C
warmer than the surrounding area and is intended for keeping cof-
fee, tea, soups, gravies, etc., piping hot.
6. To turn the Warming Tray OFF, first unplug the appliance from the
wall outlet; then detach the power cord from the unit. Unplug the
Warming Tray immediately after use.
CAUTION: Use care when wiping spills with a wet sponge or cloth
on a hot cooking area. Be careful to avoid steam burn. Also, some
cleaners can produce noxious fumes if applied to a hot surface.
5
FIGURE 2