Filter
Top Products
9
Auto Pause and Pour Feature
The Auto Pause and Pour feature allows you to pour a cup of coffee
before brewing is complete. Simply remove the Carafe from the Warming
Plate. Always keep the Lid on the Carafe down when pouring the coffee.
IMPORTANT: When using the Auto Pause and Pour feature while the
Coffee Maker is still brewing, the Carafe must be replaced in its proper
position on the Warming Plate within 20 seconds to prevent overflowing.
Replacing the Carafe will restart the brewing process.
Keep Warm Function
The automatic Keep Warm function keeps coffee at the proper serving
temperature for up to 1 hour from brewing. To keep coffee hot, return the
Carafe to the Warming Plate after serving.
To deactivate this function after brewing, simply press the Power
Button, , to turn the unit OFF.
To Brew a Second Pot of Coffee
To brew a second pot of coffee, turn the Coffee Maker OFF for
10 minutes and allow it to cool. Empty used coffee grounds from the Mill
& Brew™ Basket and repeat steps for brewing.
CAUTION: Failure to allow appliance to cool completely may cause
water to overheat and spray hot steam. The hot steam can cause
severe burns.
6
OPERATING INSTRUCTIONS
Brewing Coffee - Immediate Start
1. Plug the appliance into a standard 120V AC electrical outlet.
2. Markings on the Carafe indicate the level of water required to brew
the desired number of cups. Fill the Carafe with cold tap water.
Close the Lid back into position.
NOTE: Brewing less than 4 cups is not recommended.
3. Lift up the Reservoir Cover and slowly pour water into the Water
Reservoir. Place empty Carafe onto the Warming Plate.
4. Open the Mill & Brew™ Assembly Lid and grasp Mill & Brew™
Basket Tabs to remove the Basket Lid. Using the scoop provided
with your Coffee Maker, measure the desired amount of roasted
whole bean coffee into the Mill & Brew™ Basket. We recommend
using 1 scoop for every 2 cups of brewed coffee, which may be
adjusted to suit your individual tastes.
NOTE: 1 scoop = 1 tablespoon.
WARNING: The Mill & Brew™ Basket maximum capacity is 8
scoops of whole bean coffee. DO NOT EXCEED THE 8-SCOOP
MAXIMUM.
NOTE: 8 scoops = 8 tablespoons maximum.
5. Replace Mill & Brew™ Basket Lid. Make sure Basket is firmly seat-
ed in Assembly, Lid on Basket is secured and Lid to Assembly is
closed before attempting to operate unit.
WARNING: The Coffee Maker will not operate without the Lids being
closed properly.
NOTE: Ground coffee may be substituted for whole bean coffee.
We recommend using 1/2 to 1 tablespoon of ground coffee beans
for every brewed cup of coffee, which may be adjusted to suit your
individual tastes. See PROGRAMMING THE MILL for complete pro-
cedure.
6. You are now ready to initiate the automatic mill and brew process. If
you wish to use the delay timer so you can program the coffee
maker to mill and brew later, please read BREWING COFFEE -
PROGRAMMING THE DELAY TIMER.
Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 13