Filter
Top Products
Microwave Oven Owner’s Manual
34
Adding Your Beyond Microwave Oven to Your
Home Hub Network or iCEBOX Appliance
Network
If you do not have a Home Hub or an iCEBOX, skip this
procedure.
Note: Your Microwave must be equipped with a SANI card to
use the networking features. The SANI card is an optional item
you can purchase from your iCEBOX or Home Hub retailer.
For Instruction on installing the SANI Card, see the SANI Card
User Guide that comes in the SANI Card Package.
To add your Microwave to your Home Hub
Network
1. On your Home Hub, press MENU to open the Main Menu.
2. When the Main Menu opens, press DOWN or UP until
APPLIANCE is highlighted. Press SELECT.
3. The Appliance Menu will open.
4. Select DETECT APPL from the APPLIANCE menu.
5. On the Microwave control panel, press the NETWORK but-
ton. The Microwave will enter Binding mode. The word
BIND will display and the word “Network” will blink on the
Microwave display.
If the Microwave double-beeps and the word Bind disap-
pears, there is a SANI Card problem.
If the word Network was already on the display, the Micro-
wave is already networked. Press and hold the NETWORK