Filter
Top Products
Beyond Microwaving
35
button for five seconds to unbind the Microwave, then press
the NETWORK button once to enter bind mode again.
6. When the Home Hub detects the Microwave, it will prompt
you to bind. You must press the Select button to bind the
Microwave.
When you have accepted the Microwave, the Microwave will
beep, the word “Network” will remain lit and the Microwave
clock will synchronize to the Home Hub. From then on, the
Microwave status will be viewable on your Home Hub and the
Microwave network features will be available. If you turn off
the Microwave or the Home Hub, you do not have to rebind.
The network connection will reestablish when the the appli-
ances are turned back on.
To Add your Microwave to your iCEBOX
Appliance Network
1. On your iCEBOX, open the My Kitchen Options Menu.
2. On the My Kitchen Options Menu, select New Appliance.
3. On the Microwave control panel, press the NETWORK but-
ton. The Microwave will enter Binding mode. The word
BIND will display and the word “Network” will blink on the
Microwave display.
If the Microwave double-beeps and the word Bind disap-
pears, there is a SANI Card problem.
If the word Network was already on the display, the Micro-
wave is already networked. Press and hold the NETWORK
button for five seconds to unbind the Microwave, then press
the NETWORK button once to enter bind mode again.
4. When the iCEBOX detects the Microwave, it will prompt
you to bind. You must choose OK to bind the Microwave.