Toastmaster TFP2 Blender User Manual


 
7
To Assemble (See Figure 4):
1. Take the Container and place it on the
Base. Line up the Locking Tabs and turn
clockwise until the Container locks into
place.
2. Grasp the Knife Blade by the plastic part
and lower it onto the Center Post.
To Use:
1. Place the food to be processed into the
Container.
2. Line up the Food Chute/Cover with the
Locking Tabs on the Container, making
sure that the Pin in the Food Chute/Cover
is inserted into the Knife Blade hub. Turn
Cover clockwise until you hear a click. Put
the Food Pusher into the Food Chute.
3. Press the desired ON/PULSE Switch
function. Check results and repeat, if
necessary, until the desired consistency is
reached.
4. After processing food, press Switch to the
OFF position. Allow the Knife Blade to
stop rotating before adding more food or
removing the Food Chute/Cover.
5. Carefully remove the Knife Blade from the
Container before emptying the contents
of the Container.
HOW TO CHOP ONLY IN THE CONTAINER
The Knife Blade’s special design processes food quickly and evenly. It can
perform a variety of tasks, including chop, grind, mix, crumb and mince.
FIGURE 4