Toastmaster TJK1CAN Hot Beverage Maker User Manual


 
5.4.
Getting To Know
Your 1 Litre Electric Kettle
Your product may vary slightly from illustration.
1. Spout
2. Main Body
3. 1 LITRE MAX FILL
Line (inside)
4. Heating Element (inside)
5. Lid (P/N 31132)
6. Handle
7. Grounded-Type, 3-Prong Plug
1.
5.
6.
7.
2.
3.
4.
Before Using For The First Time
Clean Kettle by boiling a Kettle of water, following instructions below.
Then discard the water and rinse thoroughly with cold water.
CAUTION: After boiling, the water is extremely hot. When pouring
to discard the water, pour slowly and carefully and keep hands away
from the Lid and Spout.
To Boil Water
CAUTION: Always make sure the Kettle is unplugged before filling
the Kettle.
1. Lift the Lid and fill the Kettle with water above the Heating
Element but not over the 1 LITRE MAX FILL line.
2. Always hold the Kettle level when filling.
CAUTION: Always add sufficient water to the Kettle to ensure that
the water level is well above the Heating Element. This will prevent
the Kettle from automatically shutting off due to the Boil Dry
Protection feature. As a guide, we recommend that you always
begin with at least 350 ml (1
1
2
Cups) of water.
CAUTION: Do not overfill your Kettle or water may boil over. The
1 LITRE MAX FILL line is inscribed on the inside of the Kettle
and can be viewed with the Lid in the open position. If the Kettle
is overfilled there is a risk that boiling water may be ejected from
the Spout or it may boil over.
3. Set on a level, dry surface. Do not place the Kettle on any hot
surface. Make sure the Lid is closed and in place.
4. Plug the unit into a grounded 120V AC electrical outlet. The
heating process will begin immediately.
CAUTION: Do not plug in the Kettle when it is empty. When the
water is actively boiling, it will evaporate quickly in the production
of steam. Unplug the Kettle promptly to avoid it boiling dry.
WARNING: Steam will escape from the Spout while the water is
heating. Do not touch the Pouring Spout, Lid, or the Main Body
while the Kettle is ON.
NOTE: If the Kettle boils dry, the safety thermostat will automatically
cycle OFF to prevent overheating. Should cycling occur, unplug the
Kettle and allow to cool before refilling with water.
1 Litre Electric Kettle Use and Care Guide