Filter
Top Products
5
WARNING: When using the Blender, make sure the Lid is locked
into position. The Blender will not operate unless the Lid is properly
secured.
NOTE: Do not fill the Blending Jar more than 3/4 full, 6.5 cups
(50-oz.). Never operate when the Blending Jar is empty.
6. Plug the power cord into a 120V AC electrical outlet. Turn the Speed
Control Dial to the desired speed setting: 1 is the lowest speed; 3 is the
highest. Blend until ingredients have reached desired consistency.
REMEMBER: Always hold Lid in place during processing.
CAUTION: If Blending Jar rotates during blending, immediately turn
Speed Control Dial to “0”, the OFF position; then secure by
tightening the Blade Assembly on Blending Jar.
• Do not touch Blades
• Do not interfere with the Blade movement
• Do not remove Blending Jar Lid
7. When blending is completed, turn the Speed Control Dial to “0”, the OFF
position to stop the Blender. Unplug the unit.
8. Use the Handle to lift the
Blending Jar off the Base.
Turn the Blending Jar Lid to
either the strainer or the
pour position to serve from
the Jar. (See Figure 4.)
Pulse Button
1. Press the PULSE Button in short bursts until the food is processed to
your desired consistency.
2. When pulsing is completed, make sure the Speed Control Dial is at “0”,
the OFF position, and unplug the unit.
Crushing Ice
Add 1 cup of ice cubes, about 9, to the Blending Jar. Place the Lid on
Blending Jar then repeatedly press the PULSE Button until the cubes are
reduced.
Hot Ingredients
CAUTION: Use extreme caution when blending hot liquids to avoid
accidental scalding or burns. Do not use your hand to cover opening!
NOTE: When processing hot foods, always remove the Measuring Cap
from the Lid before beginning.
• DO NOT put more than 1 cup of hot ingredients into the Blending Jar
before beginning to blend.
• After the blending process has begun, you may slowly add up to an
additional 1 cup of hot ingredients through the center hole in the Lid.
• Always use a vessel with a pouring spout when adding hot ingredients.
Pour
position
Strainer
position
Figure 4
2
Additional Important Safeguards
1. All users of this appliance must read and understand this Instruction
Guide before operating or cleaning this appliance.
2. The cord to this appliance should be plugged into a 120V AC
electrical outlet only.
3. Do not leave this appliance unattended during use.
4. If this appliance begins to malfunction during use, immediately turn
the Speed Control Dial to “0”, the OFF position and unplug the cord.
Do not use or attempt to repair the malfunctioning appliance.
5. If this appliance falls or accidentally becomes immersed in
water, unplug it immediately. Do not reach into the water!
Do not use this appliance after it has fallen into or becomes
immersed in water.
6. To reduce the risk of injury to persons or property, never use this
appliance in an unstable position.
7. Do not use this appliance for other than its intended use.
8. Do not use if the Blending Jar is cracked or chipped.
Polarized Plug
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way.
Plasticizer Warning
CAUTION: To prevent Plasticizers from migrating to the finish of the
countertop or tabletop or other furniture, place NON-PLASTIC
coasters or place mats between the appliance and the finish of the
countertop or tabletop.
Failure to do so may cause the finish to darken, permanent blemishes
may occur or stains can appear.
Electric Power
If the electrical circuit is overloaded with other appliances, your
appliance may not operate properly. It should be operated on a separate
electrical circuit from other appliances.
TMR_TMBLRET_IB_6-7-06 7/7/06 6:35 PM Page 5