How to clean and store
” and then unplug
the cord.
bers in the juicing bowl before
stopping the appliance.
Clean the base unit with wet soft towel.
Use running water dissembled parts to wash with the brush.
*The strainer wash will be easier if you use a pot cleaner.
Dissemble the parts reverse way of
assemble.
*see the instruction page 12 on “how to dissemble”
After use, if the appliance does not get cleaned,
cult to clean as well as the
reason of the performance resistance.
The color of Beta-Carotene which is in Carrots and
ect the color of the juicer drum.
rst and then use
soap.
Dissemble silicones from wiper and wash them.
(See the page 15)
TIP
by pouring 1 or 2 cups of water into the
Feeding Chute after each use (self-
cleaning).
the cord.
Reverse the assembly instructions to disassemble the parts, then use running water to wash
the disassembled parts with the cleaning brush.
Clean the Main Body with a damp, soft
towel.
*see page 12 on “how to disassemble”
If the appliance does not get cleaned properly after
Neglecting to properly clean the machine may
possibly result in a gradual decline in prime perfor-
mance of the appliance.
The color of vegetables such as carrots and spinach
water.
Disassemble the silicone blades from Pulp Wiping
Assembly and wash them. *See the page 15.
HOW TO CLEAN AND STORE
How to dissemble
To dissemble the lid by turning the
counter-clockwise.
Screw, strainer and wiper will be taken out
together.
Twist the drum by turning like arrow
and lift it by picking like arrow to
dissemble.
Screw, strainer and wiper are dissembled.
When lid does not open well, Do "Stop" ->
"Reverse" -> "forward" and repeat steps over
again for 1 minute to extract leftovers inside
of the drum.
Juicing Screw
Strainer
Rotation wiper
To disassemble the lid, turn the feeding
chute assembly counter-clockwise.
Twist the Auger Housing by turning
counter-clockwise like arrow 1 and lift it
like arrow 2 to disassemble.
When feeding chute assembly does not
“Forward” and repeat steps over again for
1 minute to extract leftover fruit particles
that might’ve been left inside of the juic-
ing system.
Vertical Auger, Juicing Screen and Pulp
Wiping Assembly will be taken out
together.
Disassemble Vertical Auger, Juicing
Screen and Pulp Wiping Assembly.
Vertical Auger
Juicing Screen
Pulp Wiping
Assembly
How to disassemble
HOW TO DISASSEMBLE