Filter
Top Products
8
Use the Homogenizing Nozzle (with the smallest hole) for homogenizing and
grinding fresh garlic, onion, ginger or peppers.
Do not use the Homogenizing Nozzle for dried pepper, coffee beans etc.
Foods need to be cut into small lengthwise pieces before juicing.
There may be some normal squeaking noises while operating.
Insert the Funnel to the Auger Housing. Place the Juice Container underneath the
specified Juice Outlets and the Pulp Container underneath the Nozzle (as seen in
the drawing). Connect the electric plug on the machine to an electrical outlet.
Turn the machine on and feed in fruits and vegetables in small amounts into the
Funnel. Use the Plastic Plunger for assistance in pushing down foods.
When you need to use the reverse switch while in its normal operation, press
the stop switch first then the reverse switch.
Do not use any foreign articles such as spoons, forks or knives for it may
result in damage to your machine.
Always use the Plastic Plunger during operation.
If any hard or foreign objects are put into the machine and results in the motor to
stop, use the reverse switch for about 1 to 2 seconds 2-3 times.
Separate the Screen Locking Cap and Nozzle from the unit by turning clockwise
Pull to remove the assembled Screen. (For easier disassembly, run the reverse switch
on for 2-3 seconds or use butter knife to gently dislodge screen) . After removing
screen locking cap and nozzle, and screen, flush with water by pouring water down
the feeding chute, while running the machine, with large empty bowl below openings.
This does speed cleaning process - keep fingers out of moving parts
Turn the Auger Housing Retaining Ring counter-clockwise to separate from the
unit.
Push the front end of the Auger towards the Auger Ring to separate the Auger from
the Auger Housing.
4.
5.
6.
1.
2.
3.
4.
DISASSEMBLING THE SOLO STAR
9
In the unlikely event that you do need service on your Solo Star Juice Extractor, or
if it fails to function properly while within the warranty period (normal household
operation only) - contact the nearest authorized Solo Star Service Center. PLEASE
FOLLOW THE INSTRUCTIONS BELOW:
SERVICE CENTER
USA: Tribest Corp. 14109 Pontlavoy Ave., Santa Fe Springs, Ca 90670, USA
TEL: 562-623-7150; 888-263-6033 FAX: 562-623-7160
EMAIL: service@solostarjuicer.com WEBSITE: www.solostarjuicer.com
WHEN YOU NEED SERVICE
Call to obtain a return authorization number to send your unit or part back to
the service center. Explain the problem you are experiencing.
Pack your Solo Star or part securely in the original shipping box. Make sure
all necessary parts are enclosed. Fill out the Service Request Form below,
detach it and enclose it in the shipping box.
Securely seal the shipping box with strapping tape.
Address the box to the service center. Be sure to put your return address and
the Return Authorization Number on the outside of the package.
It is always wise to insure the package against possible damages or loss in
transit. Ship prepaid.
Detach Form in Dotted Line
1. First Name Initial
Last Name
Address: Street Apt#
City State Zip
Phone
2. Serial# Model#
3. Reason for service request
4. Date of Purchase 5. Place of Purchase
6. Name of parcel/post carrier( In case of damage during delivery)
Service Request Form