Filter
Top Products
KEY
A AUTO DISPLAY
B MINUTE MINDER BUTTON
C COOKING HOURS BUTTON
D STOP TIME BUTTON
E COOKING SYMBOL
F MANUAL SELECTOR BUTTON
G DECREASE CONTROL
H INCREASE CONTROL
NOTE:
Steps 1 and 2 below must be completed
before the oven will operate manually.
1. SET THE TIME OF DAY
When the electricity supply is first switched ON,
the display will flash both 0.00 and AUTO as Fig.
1.
Press the two buttons marked ( ) and ( )
press the increase control button (+) and if
necessary, the decrease control button (-) until
the correct time on the 24 hour clock is reached,
e.g. 10.00am as Fig. 2.
Note: The increase and decrease control
buttons operate slowly at first, and then more
rapidly. They should be pressed separately.
The AUTO symbol will go out when the correct
time of day is set as Fig. 2.
2. THE MINUTE MINDER
The minute minder givers an audible reminder at
the end of any period of cooking up to 23 hrs 59
mins. It is not part of the automatic control.
To set, press the minute minder button (------)
and the digital display will read 0.00 and the bell
symbol will glow.
Depress the increase control (+) until the display
indicates the interval to be timed, e.g. 1hr 45
mins as Fig. 4. If necessary depress the
decrease control (-) to achieve the correct time
interval.
NOTE: This must be completed within 4
seconds of first pressing the minute minder
button.
38
THE ELECTRONIC TIMER (BD 931)
Fig. 1
Fig. 2
Fig. 3
Fig. 4