Filter
Top Products
The control knobs must be pushed in towards the
panel before they can be turned or adjusted.
The cooling fan comes on immediately when the grill
is switched on and after a short time when either of
the ovens are in use and switches off when cooking
is completed.
During the initial period the cooling fan may cycle ON
and OFF, this is quite normal.
It may run on after the ovens or grill are switched off
to keep the controls cool.
Always allow the cooling fan to cool the cooker down
before switching off at the wall prior to carrying out
any cleaning or maintenance work.
NOTE
The action of the cooling fan will depend on how long
the oven(s) or grill have been used and at what
temperature. It may not switch in at all at lower
temperature settings nor run on where the grill or
oven has only been used for a short time.
CONTROL PANEL INDICATOR NEONS
These lights indicate whether the grill or ovens are
switched ON. In the case of the ovens, the neons
also indicate when the set temperature has been
reached. They will cycle on and off during use to
show that the temperature is being maintained.
If the neons do not operate as the instructions
indicate the controls have been incorrectly set.
Return all controls to zero and re-set following the
instructions for the required setting.
When the oven has been set for automatic cooking
the neon should remain unlit during OFF periods.
.
GRILL AND OVEN FURNITURE
The following items of oven furniture have been
supplied with the cooker.
1 grill pan
1 grill pan handle
1 grill pan grid
1 grill deflector
1 trivet
1 meat tin
2 straight shelves
1 cranked shelf for
grilling and top oven
cooking only
Scuffing of the Stayclean lining by the oven furniture
pack may occur during transit.
These marks will disappear after the oven elements
have been burnt off for the first time.
16
PUSH TO TURN CONTROLS (BD 931 only)
THE COOLING FAN FOR THE CONTROLS