Filter
Top Products
KEY:
CLOCK
MANUAL
TIMER
COOK TIME
END TIME
COOKING SYMBOL
AUTOMATIC
A = SELECTOR
B = SETTING KNOB
THESE STEPS MUST BE FOLLOWED
BEFORE THE COOKER WILL OPERATE
MANUALLY
1. TO SET THE TIME OF DAY
When first switching on, the display will flash
0.00 and cookpot ( ) symbol. See Fig. 1.
Turn and hold selector (A) to clock ( ). Then
turn setting knob (B) until the correct time of day
is shown, e.g. 13.00 (1pm). Release both knobs,
the display will stop flashing and the cookpot
(------) symbol will glow. Fig. 2. Selector (A) will
return to 'Manual'.
Note:
The clock will show the time of day as long as
the oven is switched ON at the wall. The above
steps must be followed every time the oven is
switched OFF at the wall or if there has been a
power failure.
2. TO SET THE MINUTE MINDER
Turn the selector (A) to 'Timer'. 0.00 and the
cookpot ( ) symbol will glow. Fig. 3.
Using setting knob (B), turn until the required
period to be timed is shown e.g. 40 mins. Fig. 4.
The minute minder will count down in one minute
intervals. To check the time of day, return the
selector (A) to 'Manual'.
19
Fig.4
Fig.3
Fig.2
Fig.1
AN OVEN FUNCTION MUST BE SELECTED
BEFORE THE OVEN WILL OPERATE WITH THE
AUTOMATIC TIMER.
THE ELECTRONIC TIMER (BS 621)