Filter
Top Products
12. Refit the top door by carefully sliding it onto
the upper hinge pin (F).
13. Turn the centre hinge (L) around from its
illustrated position and transfer it to the
opposite side.
14. Gently press the centre hinge up into the door.
15. Secure the centre hinge to the cabinet, refit
screw secure (J). Ensure the top door is
correctly aligned before fully tightening the
screw. This can be achieved by sideways
movement of the centre hinge.
16. Refit the bottom door by sliding it onto the
centre hinge pin.
17. Take the bottom hinge foot assembly (B) and
transfer it over to the opposite side of the
cabinet, being careful to retain any spacer
washers fitted onto the bottom hinge pin. Push
the hinge foot assembly (B) into the door
bearing using the pin of the foot for location.
Three holes will then line up with the hinge
foot and screws (C) should be used to secure
the hinge.
18. Refit level adjuster and spacer (A) in the
opposite side of the cabinet.
19. Stand the appliance upright.
Side Fixed Handle Change
If your appliance is fitted with a side fixed handle:
To fix the handle on the opposite side proceed
as follows:
i) Protect the paintwork on the door from
damage with masking tape or other suitable
material while using a blunt knife or similar
instrument to carefully prise out the plastic
plugs from alternative handle positions on the
opposite side of the door.
ii) Remove the screw covers and screws from
the handle and transfer it to its new position
replacing the plastic plugs into the vacated
screw holes.
20