Filter
Top Products
12
Please note that this is a 24 hour clock, for
example 2.00pm is shown as 1400.
In the following pages we explain how to set the
controls. Read through them a few times until you
are familiar with the procedure.
If the cooker is switched off on the wall, or there is
a loss of power, the clock will stop and you will not
be able to use the main oven. When you first
switch the electricity supply on, the timer display
will flash.
TO SET THE TIME OF DAY
Turn the selector knob to ‘Manual’ then turn to
‘Time Setting’.
Set the correct time by tuning and holding the
setting knob clockwise. Adjust the time by turning
the setting knob in either direction.
Turn the selector knob back to ‘Manual’.
TO USE THE MINUTE MINDER
Turn the selector knob to ‘Countdown’. Turn the
setting knob clockwise until the display shows the
time you want. The bell symbol ( ) will be
showing and this will stay lit up during the time.
Our diagram shows the timer set to 5 minutes.
If you change your mind and want to cancel the
time you have set, simply turn the setting knob
anticlockwise. Then turn the selector to ‘Manual’.
When you are using the minute minder you can
maketheclockshowthetimeofdaybyturningthe
selector knob to ‘Manual’. The bell symbol will stay
on to remind you that the minute minder is set. At
the end of the timed period an alarm will sound and
the time of day will show in the display.
Note:
You can use the minute minder when an automatic
sequence has been set, as long as you remember
the following point.
1 Turn the selector knob to ‘Automatic’ as soon
as you have entered the timed period into the
display.
AUTOMATIC CONTROL
You can only use the automatic control for the
main oven. When you use the automatic controls
for the first time it’s probably best to choose a time
when you are at home. That way you can check to
make sure you’ve set everything correctly and
you’ll feel much more confident when you are away
from home in the future.
THE TIMER
Cookpot symbol
Bell symbol
Selector Setting knob