Tricity Bendix TCM10 Coffeemaker User Manual


 
AUTO START (TIME DELAY) BREWING
Example: To bew coee at any time of your choosing (say 22:20):
1 Set the Auto Start Time
Press the PROG Button.twice. The button will light blue and the
word TIMER appears in the display. The screen defaults to 12:00
Press the HOUR button. The button will illuminate
Press the HOUR button until you reach “22”:
Press the MIN button. The button will illuminate
Press the MIN button until you reach “20”:
Press the PROG button ONCE. The word TIMER will erase from the
display and the display reverts to the clock time.
After a few seconds the PROG light will extinguish.
HINT: Set the Auto start time to 5 minutes before you want the coee!
2 Set the Auto Start Programme
Press the ON/AUTO/OFF Button twice. The button will ash blue to indicate the
coee maker is in Auto Start mode.
Fill the coee maker and place the jug on the hotplate.
When the preset time arrives the machine will switch on and brew the coee.
During this process the ON/AUTO/OFF Button will glow red.
When the coee is made it will keep warm for 2 hours. The machine will then
switch o the power to the hotplate.
To switch o Auto Start: Press ON/AUTO/OFF Button. The Indicator ashes
a steady Blue. This indicates that the machine has been turned o. After a few
seconds the Blue light will extinguish.
You can now brew coee for instant use. The machine will retain the Auto Start
time as long as it is connected to the mains supply.
To restore Auto Start: Press the ON/AUTO/OFF Button twice. The button will ash
blue to indicate the coee maker is in Auto Start mode..
In Auto start mode the time display on the coee maker is always the clock time.
3 To nd out the Auto start time:
Press the PROG Button twice. The button will ash and the Auto Set time will
display for a few seconds after which the light will extinguish and the display will
revert to clock time.
Special Features
6