Filter
Top Products
49
TROUBLESHOOTING
BEFORE CALLING FOR SERVICE
If the unit appears to be malfunctioning, read through NORMAL OPER-
ATION first. If the problem persists, check the TROUBLESHOOTING
GUIDE. Locate the problem in the guide and refer to the cause and its
remedy before calling for service. The problem could be something very
simple which can be solved without a service call.
TROUBLESHOOTING GUIDE
ELECTROCUTION HAZARD
NEVER attempt to repair or perform mainte-
nance on the unit until the main electrical
power has been disconnected.
Troubleshooting — What to check when problems occur
Problem Possible Cause Remedy
No interior light Loose or burned out Tighten or replace bulb.
bulb See LIGHT BULB
REPLACEMENT.
Light won’t go out Light on/off switch is Turn switch to OFF.
when door is turned to ON. See LIGHT SWITCH AND
closed. BULB.
The unit is not Light staying on Adjust door so light switch
cold enough bracket contacts switch
plunger. See ALIGNING
THE DOOR.
75 BEV - Make sure the
light switch is in the “OFF”
position.
Door gasket not Adjust door. See
sealing properly ALIGNING THE DOOR.
Item(s) interfering with Reposition or remove
door. item(s).
Dirty condenser coils Clean condenser. See
CLEANING AND
MAINTENANCE.
DANGER
! !
30035 User Manual Body.qxd 1/5/05 8:08 AM Page 49