Filter
Top Products
3. Turn the adjusting screw toward the minus (–) sign (clockwise) for
smaller cubes or toward the plus (+) sign (counterclockwise) for
larger cubes.
4. Install the ice maker assembly cover.
MAINTENANCE
Periodic cleaning and proper maintenance will ensure efficiency, top
performance, and long life. The maintenance intervals listed are based
on normal conditions. You may want to shorten the intervals if you have
pets, the unit is used outdoors, or other special considerations.
EXTERIOR CLEANING — AS REQUIRED
The door, grille and cabinet may be cleaned with a mild detergent and
warm water solution. Do not use solvent based or abrasive cleaners.
Use a soft sponge and rinse with clean water. Wipe with a soft, clean
towel to prevent water spotting.
Stainless steel models can discolor when exposed to chlorine gas and
should be cleaned. Clean stainless steel models with a mild detergent
and warm water solution and a damp cloth. Never use abrasive clean-
ing agents.
Stainless steel models exposed to chlorine gas and mois-
ture, such as areas with spas or swimming pools, may have
some discoloration of the stainless steel. Discoloration
from chlorine gas is normal.
INTERIOR CLEANING — AS REQUIRED
1. Disconnect power to the unit.
2. Remove shelves if desired, see GLASS SHELF REMOVAL/
INSTALLATION.
3. Open the door and remove any ice from the storage bin (if equipped).
4. Wipe down the interior with a solution of non-abrasive mild
detergent and warm water.
5. Rinse thoroughly with clear water.
6. Reconnect power to the unit.
19