Filter
Top Products
15 U-Line 3000 Series Cleaning
Condenser Cleaning
Interval - As Needed
To maintain operational efficiency, keep the front grille free of dust
and lint, and clean the condenser when necessary. Depending on
environmental conditions, more or less frequent cleaning may be
necessary.
WARNING
Disconnect electric power to the unit before cleaning
the condenser.
IMPORTANTIMPORTANT
DO NOT use any type of cleaner on the condenser unit.
Condenser may be cleaned using a vacuum, soft brush or
compressed air.
Storage, Vacation and Moving
If not using the unit for an extended period, or otherwise stored,
follow these steps completely:
WARNING
Electrical Shock Hazard. Disconnect power before
servicing. Before operating, replace all panels. Failure
to do so may result in electrical shock or death.
IMPORTANTIMPORTANT
If the ambient temperature is expected to drop below
50°F, turn off and unplug unit.
1. Remove all consumable contents from the unit.
2. Disconnect the power cord from its outlet, and leave it
disconnected until the unit is returned to service.
3. Clean and dry the interior of the cabinet.
4. During periods of nonuse, the cabinet must remain open to
prevent formation of mold and mildew. Open door a minimum
of 2 in. (5 cm) to provide the necessary ventilation.
Product Disposal
DANGER
RISK OF CHILD ENTRAPEMENT. Before you throw away
your old refrigerator or freezer, take off the doors and leave
shelves in place so children may not easily climb inside.
If the unit is being removed from service for disposal, check and
obey all Federal, State and Local regulations regarding the disposal
and recycling of refrigeration appliances, and follow these steps
completely:
1. Remove all consumable contents from the unit.
2. Disconnect power to the unit’s power receptacle. Unplug the
power cord from its outlet.
3. Remove the cabinet door.