Filter
Top Products
Operation
13
Preparing Dishes Cycle Data
Product Controls
12
Note:
All wash times, temperatures and fills are approximate and are
dependent on installation and environmental conditions.
Note:
Heating delays to meet set temperatures may extend the
cycle times.
Note:
Wash time does not include the 30 minute condensate dry time.
Cycle
name
Recommended
dish types/
soil level
Temperatures
Total
water
(gal.)
Total
Wash Time
(minutes)
120F˚ (49C˚)
Pots/
Pans
Heavily soiled
pots, pans,
casserole and
dishware
Prewash & Rinse–130°F
(54° C)
Main Wash–145°F (63°C)
Last Rinse–150°F (66°C)
8.3 131
(min.)
Normal
Wash
Normally soiled
dishes
Main Wash–120°F (49°C)
Last Rinse–140°F (60°C)
4.25 117
(min.)
Light/
China
Lightly soiled
items, china and
crystal
Main–120°F (49°C)
Rinse–135°F (57°C)
5.6 101
(min.)
Rinse/
Hold
All dishware Rinse 1.4 8.5
(min.)
It is not necessary to rinse normal food soils off the dishes before
putting them in the dishwasher, although larger solid particles, such as
bones, seeds, skins, pits, and toothpicks should be removed.
If you are not going to run the dishwasher immediately after loading, it
is best to rinse salty and highly acidic foods off stainless steel, silver,
and silverplate flatware. Prolonged contact of foods—including lemon
juice, salt, vinegar, mustard, mayonnaise, and salad dressings—with
stainless steel can cause corrosion (pitting).
Before Operation
1. Load the dishes per recommended loading. See section on Loading
Dishwasher.
2. Make sure there is rinse agent in the dispenser. Add rinse agent if
needed. See section on Rinse Agent.
3. Add proper amount of detergent and pre-wash. See section on
Dishwasher Detergent.
4. Push both top and bottom racks in.
5. Select the desired cycle and option(s).
6. Press “START”. The “START” symbol will illuminate to indicate the
unit is ready.
7. Close the door tightly until you hear a click. Otherwise, the
dishwasher will not start.
Option Restrictions
All options are not available for all cycles. Please note the following:
• The option “HI TEMP WASH” is not available with the
“LIGHT/CHINA” cycle.
• No options are available in the “RINSE/HOLD” cycle.
• The option “SANITIZED 155˚F RINSE” is not available with the
“LIGHT/CHINA” cycle.
After selecting the wash cycle and options, depress “START” button.
The start symbol will illuminate. This merely means the machine is
ready. Close the door securely within 4 seconds of pressing the
“START” button.