Viking DCWL3944 Ventilation Hood User Manual


 
Warnings
3
Congratulations
Your purchase of a Viking hood attests to the importance you
place upon the quality and performance of the major
appliances you use. With minimal care, as outlined in this
guide, your new hood is designed to provide you with years of
reliable service. Please take a few minutes to learn about its
proper and efficient use and care.
This guide will provide you with the information you need to
become familiar with your hood’s care and operation.
Your complete satisfaction is our ultimate goal. If you have any
questions or comments about this product, please contact the
dealer from whom you purchased it, or contact our Consumer
Support Center at 1-888-VIKING1.
We appreciate your choosing a Viking Range Corporation
product, and hope that you will again select our products for
your other major appliance needs.
For more information about the complete and growing
selection of Viking products, contact your dealer or visit us
online at vikingrange.com.
2
WARNING
To reduce the risk of fire, electric shock, or injury when using
your unit, observe the following:
• Installation work and electrical wiring must be done by
qualified person(s) in accordance with all applicable codes
and standards, including fire-rated construction.
• Sufficient air is needed for proper combustion and
exhausting of gases through the flue (chimney) of fuel
burning equipment to prevent back drafting. Follow the
heating equipment manufacturer’s guideline and safety
standards such as those published by the National Fire
Protection Association (NFPA), and the American Society for
Heating, Refrigeration and Air Conditioning Engineers
(ASHRAE), and the local code authorities.
• When cutting or drilling into wall or ceiling, do not damage
electrical wiring and other hidden utilities.
• Ducted fans must always be vented to the outdoors.
WARNING!: To reduce the risk of fire, use only metal
ductwork.
CAUTION!: To reduce risk of fire and to properly exhaust
air, be sure to duct air outside. Do not vent exhaust air into
spaces within walls or ceilings, or into attics, crawl spaces,
or garages.
WARNING
To reduce the risk of fire, electric shock, or injury to persons,
observe the following:
• Use this unit only in the manner for which it is intended. If
you have any questions, contact the manufacturer.
• Before servicing or cleaning unit, switch power off at service
panel and lock service panel to prevent power from being
switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent
warning device, such as a tag, to the service panel.
READ AND SAVE THESE INSTRUCTIONS