Viking DCWL3944 Ventilation Hood User Manual


 
15
Product Care
14
Product Care
Cleaning Brass Parts
All brass body parts should be wiped regularly with hot soapy
water. When hot soapy water will not do the job, use every day
household cleaners that are not abrasive.
Replacing the Light Bulbs
When removing bulbs use an oven mitt to protect your hand
in case the bulb breaks.
Halogen Lights
1. Unscrew halogen bulb.
2. Replace the bulb with a 120 volt, 50-watt halogen bulb.
Infrared Heat Lamp
1. Unscrew infrared bulb from heat lamp socket.
2. Replace the bulb with an R40, 120 volt, 250-watt infrared
bulb.
Cleaning and Maintenance
1
2
1
1
1
2
2
Service Information
If service is required, call your dealer or authorized service agency.
The name of the authorized service agency can be obtained from the
dealer or distributor in your area.
Have the following information readily available.
Model number
Serial number
Date purchased
Name of dealer from whom purchased
Clearly describe the problem that you are having. If you are unable to
obtain the name of an authorized service agency, or if you continue
to have service problems, contact Viking Range Corporation at
1-888-VIKING1 (845-4641), or write to:
VIKING RANGE CORPORATION
PREFERRED SERVICE
1803 Hwy 82W
Greenwood, Mississippi 38930 USA
Record the information indicated below. You will need it if service is ever
required. The model and serial number for your hood is located behind the
baffle filter on the left side panel in the lower right corner.
Model no._____________________ Serial no. ________________________
Date of purchase _______________ Date installed ___________________
Dealer’s name __________________________________________________
Address ________________________________________________________
_______________________________________________________________
If service requires installation of parts, use only authorized parts to ensure
protection under the warranty.
THIS MANUAL SHOULD REMAIN WITH THE HOOD FOR FUTURE
REFERENCE.