Filter
Top Products
IENIEROYSAVIING TIIIPS
1. Only start a wash when the machine is completely full.
2. Make sure that for normal clay-to-day washing the low temp setting is selected.
3. Select the cycle without the Extra Dry option.
4. If you plan to wash dishes right away, there is no need to prewash. Simply scrape, load, and wash.
5. Use the Pots/Pans and Heavy programs only for heavily soiled dishes.
IHIO'W TO OIPIERATIE
BEFORE OPERATION REVIEW
1. Load the dishes properly.
2. After pushing the baskets back inside the unit, manually rotate the upper and lower spray arms to be sure they turn
freely
3. Make sure there is rinse aid in the dispenser. Acid rinse aid if needed.
4. Add proper amount of detergent. Close the detergent compartment cover.
5. Press the POWER button on the left side of the control panel.
6. Select the desired wash program and option(s). A red light appears in or above the selected cycle/option.
7. Press start. The start symbol will flash to indicate the unit is ready.
8. Close the door tightly until you hear a click. Otherwise, the dishwasher will not start.
IHIIICH CYCILIE/ OIPTIION TO SIEILIECT(Refer to Control Panel - p. 3)
Wash Cycles Options
m
Pots/Pans
Heavy
Normal
Light
China
Quick
For heaviest soiled loads, such as pots and pans,
casserole dishes, etc. This cycle uses high water
temperature.
For heavily soiled items
For normally soiled loads, such as plates,
glasses, bowls and lightly soiled pans.
For lightly soiled loads that are washed
immediately after use. Fine china and crystal
can be washed in this program by using low
temperature setting.
For very lightly soiled dishes.
To rinse dishes that you plan to wash later that
day.
Rinse/Hold
Allows you to choose to wash only the top rack,
bottom rack, or both racks. The corresponding
Top/Bottom symbol lights the rack(s) you have selected.
Rack (DFUD142 only)
e
Temperature
Selects a high or low water temperature for the
wash program. Indicator light glows when on
the high setting and remains off when on low
setting.
Delay
Lets you delay running the dishwasher for five
hours. After making your selections, press Delay
then press start and close the doon The
dishwasher will start five hours laten
½½ Activates a higher temperature in the last rinse
and a longer drying cycle to the dishes.
Extra Dry
_-_ Washing time is reduced and wash temperatures
are lowered. (Not available for use with Quick
Express Wash or Rinse/Hold cycles). (DFUD142 only)
After you have selected the wash cycle and options, press Start. The start symbol will flash. This merely means
the machine is ready. Close the door securely to start the dishwasher.