Viking DMOD241SS Microwave Oven User Manual


 
E2
IMPORTANT–Please Read and Follow!
• Before beginning, read these instructions
thoroughly and carefully.
• Because the kit includes metal parts, caution
should be used in handling and installation to
avoid the possibility of injury.
• Do not remove permanently affixed labels,
warnings or plates from the product as this may
void the warranty.
• Observe all local and national codes, requirements
and ordinances.
• Installers should leave these instructions with the
consumer who should retain them for the local
inspector’s use and for future reference.
• For SAFETY CONSIDERATIONS do not install
drawer in any combustible cabinetry, which is
not in accord with the stated clearances and
dimensions on page 4, See FIGURE 1.
IMPORTANT SAFETY
INSTRUCTIONS
• WARNING: If the information in this manual is
not followed exactly, a fire or electrical shock
may result that could cause property damage,
personal injury or death.
• WARNING: To reduce the risk of tipping,
the DrawerMicro Oven must be secured by a
properly installed Anti-Tip block.
• This appliance must be electrically grounded in
accordance with local codes.
• Make sure the wall coverings and the cabinets
around the DrawerMicro Oven can withstand the
heat generated by the appliance.
• WARNING: Never leave children alone or
unattended in the area where a appliance is
in use. Never leave the drawer open when the
microwave is unattended.
• WARNING: Stepping, leaning or sitting on the
drawer may result in serious injuries and can also
cause damage to the appliance.
• Do not use the DrawerMicro Oven as a storage
space. This creates a potentially hazardous
situation.
• Check that the time-of-day is in the display. If not,
touch Stop/Clear to prevent unintended use.
DO NOT USE AN EXTENSION CORD WITH
THIS APPLIANCE. SUCH USE MAY RESULT
IN FIRE, ELECTRICAL SHOCK OR OTHER
PERSONAL INJURY.
ELECTRICAL GROUNDING INSTRUCTIONS
This oven must be electrically grounded in
accordance with local codes or, in the absence
of local codes, with the National Electrical
Code, ANSI/NFPA 70 – latest edition.