Viking DMOD241SS Microwave Oven User Manual


 
E6
GROUNDING
INSTRUCTIONS
This appliance must be grounded. In the event of
an electrical short circuit, grounding reduces the
risk of electric shock by providing an escape wire
for the electric current. The DrawerMicro Oven is
equipped with a cord having a grounding wire with
a grounding plug. The plug must be plugged into
an outlet that is properly installed and grounded in
accordance with the National Electrical Code and
local codes and ordinances.
WARNING: Improper use of the grounding plug
can result in a risk of electric shock.
DO NOT USE
AN EXTENSION CORD. If the power supply
cord is too short, have a qualified electrician or
serviceman install an outlet near the appliance.
3-Prong Plug
Grounding Pin
3-Prong
Receptacle
Ground
Receptacle Box
PERMANENT AND CORRECT INSTALLATION
Care, Cleaning and
Maintenance
Refer to the Use and Care Manual for cleaning
instructions.
Model and Serial Number
Location
The name plate includes model number and
serial number. Open the Microwave Drawer fully.
The label is slightly beyond the back wall of the
microwave cavity facing up from the flat surface.
Before You Call for Service
Read the BEFORE YOU CALL and operating
instruction sections in your Use and Care Manual.
It may save you time and expense. The list includes
common occurrences that are not the result of
defective workmanship or materials in this range.
Refer to the warranty in your Use and Care Manual
for Viking’s toll-free service number and address.
Please call or write if you have inquiries about your
microwave product and/or need to order parts.
Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-VIKING1 (845-4641)
or visit the Viking Web site at
vikingrange.com