Filter
Top Products
19
Clocks and Timers
Product Controls
18
To Set The Automatic Time Bake Program: (cont.)
3. Set the Oven Function selector to the desired function –
BAKE, CONVECTION BAKE, or TRUCONVEC™, etc.
4. Set the temperature control knob to the desired baking
temperature.
5. The Automatic Time Bake program is now set.
Note: The display will continue to show the amount of bake time that
was programmed (this will remain until the programmed start time is
reached). You can return the display to clock mode by pressing the
“CLOCK” button. Notice that a small clock will be displayed in the
upper right corner to indicate that a program is in progress. Switch
back to the timer mode by pressing the “BAKE TIME” button.
6. When the specified time is reached, the oven will automatically turn
on. It will bake for the programmed amount of time at the selected
temperature.
Note: At 1 minute from the end of the specified bake program, the
oven timer will beep once. At the end of the specified bake program,
the oven will automatically turn off and the timer will sound a series of
three beeps. This will continue until the “START TIME” button is
pressed. The display will then return to displaying the time.
Note: Setting the remaining duration time to :00 will cancel the
Automatic Bake program.
Clocks and Timers
Product Controls
Timer Alarm
At the end of a MIN/SEC TIMER program or BAKE TIME program,
the alarm will consist of three beeps followed by two beeps every
10 seconds until the “MIN/SEC TIMER” button is pressed. Whenever
a valid function key is pressed or when a control function starts
automatically, one beep will be sounded. When an invalid function
key is pressed, two beeps will be sounded.
Setting the Automatic Start Time Bake Program
(Not available in lower oven of DDOE301 Models)
The BAKE TIME and START TIME modes of the timer can be used to
automatically turn the oven on and off at a preselected time. The
Automatic Time Bake program is ideal for foods with no danger of
spoilage during the time the oven is left off.
To Set The Automatic Time Bake Program:
1. Set the start time:
A) For Single Ovens – Program the start time by pressing the
“START TIME” button and turning the “SET” knob until the
desired start time is displayed. This is the time of day you want
the food to begin cooking.
B) For Double Ovens – Press the “START TIME” button once to
set the starting time for the upper oven (UPPER OVEN will show
on the display). Press the “START TIME” button twice to set the
starting time for the lower oven (LOWER OVEN will show on the
display). Then program the start time by turning the “SET” knob
until the desired start time is displayed. This is the time of day
you want the food to begin cooking.
2. Set the desired baking time:
Once the start time is set, the display will switch to :00 and
the words SET, COOK and TIME will appear on the right side of the
display. You will now enter the desired baking time. Turn the “SET”
knob until the desired baking time is displayed in hours and
minutes. Once the desired bake time is set, the word SET will
disappear and the word DELAY will appear in the display indicating
that the Bake Hours program has been set.
Note: For double ovens, the word DELAY will show with either
UPPER OVEN or LOWER OVEN depending on which oven has
been selected.
Note: For delayed Time Bake, the oven will automatically add 30
minutes to the programmed cooking time to account for preheat.