IMPORTANT
• Before beginning, please read these
instructions completely and carefully.
• DO NOT remove permanently affixed
labels, warnings, or plates from product.
This may void the warranty.
• All local and national codes and
ordinances must be observed. Installation
must conform with local codes or in the
absence of codes, the National Fuel Gas
Code ANSI Z223.1 NFPA54-latest edition.
• The installer must leave these instructions
with the consumer for local inspector’s use
and for future reference.
Installation of any gas-fired equipment
should be made by a licensed plumber. A
manual gas shut-off valve must be installed
in the gas supply line ahead of the cooktop
in the gas stream for safety and ease of
service.
In Canada: Installation must be in
accordance with the current CAN/CGA
B149.1 & 2 Gas Installation codes and/or
local codes. Electrical installation must be in
accordance with the current CSA C22.1
Canadian Electrical Codes Part 1 and/or
local codes.
In Massachusetts: All gas products must be
installed by a “Massachusetts” licensed
plumber or gasfitter. A “T” type handle
manual valve must be installed in the gas
supply line to the appliance.
3
– Please Read and Follow
Your safety and the safety of others is
very important.
We have provided many important safety
messages in this manual and on your
appliance. ALWAYS read and obey all
safety messages.
This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.
All safety messages will be preceded by
the safety alert symbol and the word
“DANGER,” “WARNING” or “CAUTION.”
These words mean:
Hazards or unsafe practices
which WILL result in severe personal
injury or death
DANGER
Hazards or unsafe practices
which COULD result in severe personal
injury or death
Hazards or unsafe practices which
COULD result in minor personal injury
or property damage.
All safety messages will identify the
hazard, tell you how to reduce the chance
of injury, and tell you what can happen if
the instructions are not followed.
WARNING
CAUTION
Table of Contents
Warnings & Important Safety Instructions _______________________________________________3
Dimensions (VGSU Professional) _______________________________________________________6
Specifications (VGSU Professional) _____________________________________________________7
Dimensions (DGSU Designer) _________________________________________________________8
Specifications (DGSU Designer) _______________________________________________________9
Cutout Dimensions _________________________________________________________________10
Cutout Dimensions (VGSU Cooktop over Single Electric Oven)___________________________11
Cutout Dimensions (DGSU Cooktop over Single Electric Oven) __________________________12
Clearance Dimensions (Proximity to Cabinets)__________________________________________13
Clearance Dimensions (Wood/Composite Overlay) _____________________________________14
Electrical & Gas Requirements _______________________________________________________15
General Information ________________________________________________________________17
Installation_________________________________________________________________________18
Optional Gasket Installation ______________________________________________________18
Gas & Electrical Connection______________________________________________________18
VGSU Bracket Installation ________________________________________________________19
DGSU Bracket Installation ________________________________________________________19
Final Preparation ___________________________________________________________________20
Performance Checklist ______________________________________________________________20
Service & Registration_______________________________________________________________21
2