Filter
Top Products
38
39
Product Care
Door Removal
Door Replacement and Adjustment
1
2
3
4
Open door completely.
Place pin in pin hole.
Remove hinge trim screws
and hinge trim.
Close until pins stop door.
Lift door up and out.
Product Care
WARNING
TO PREVENT
PERSONAL INJURY
Before removing the doors,
make sure the pins are
properly installed in the hinges.
Failure to do so can result in
personal injury to hands
and/or fingers.
1
2
3
4
Reinstall door to range.
Open door completely.
Reinstall hinge trim.
Remove pins from hole in hinges.
5
If the door needs to be adjusted, loosen
hinge trim screws located in step 2. Adjust
the screws located between the door
and kickplate using a 5/32” hex head
allen wrench. After adjustment,
tighten hinge trim screws.
Close door.