Filter
Top Products
17
Oven Functions and Settings
Product Controls
16
BAKE (Natural Airflow Bake)
Use this setting for baking, roasting, and casseroles.
CONVECTION BAKE
Use this setting to bake and roast foods at the same time with minimal
taste transfer.
BROIL (Infrared Broil)
Use this setting for broiling dark meats at 1” thickness or less where
rare or medium doneness is desired.
CONVECTION BROIL (Infrared Convection Broil)
Use this setting to broil thick cuts of meat.
Convection Dehydrate (CONVECTION BAKE)
Use this function to dehydrate fruits and vegetables.
Convection Defrost (CONVECTION BAKE)
Use this function to defrost foods.
Note: For more information on oven functions see “Operation”
section.
Lighting Burners
All burners are ignited by electric ignition. There are
no open-flame, “standing” pilots.
Surface Burners-Automatic Reignition
To light the surface burners, push and turn the
appropriate control knob counter clockwise to any position.
This control is both a gas valve and an electric switch. Burners will ignite
at any “ON” position with the automatic re-ignition system. If the flame
goes out for any reason, the burners will automatically reignite if the gas
is still flowing. When gas is permitted to flow to the burners, the electric
igniters start sparking. On all surface igniters you should hear a “clicking”
sound. If you do not, turn off the control and check that the unit is
plugged in and that the fuse or circuit breaker is not blown or tripped.
Within a few moments, enough gas will have traveled to the burner to
light. When the burner lights, turn the burner control to any position to
adjust the flame size. Setting the proper flame height for the desired
cooking process and selecting the correct cooking vessel will result in
superior cooking performance, while also saving time and energy.
Vari-Simmer™
Simmering is a cooking technique in which foods are cooked in hot
liquids kept at or just barely below the boiling point of water. Simmering
ensures gentler treatment than boiling to prevent food from toughening
and/or breaking up. The size of the pan and the volume of food can have
a significant effect on how high or low a flame is needed for simmering.
For this reason, Viking range and rangetop burners are engineered with a
Vari-Simmer setting. The Vari-Simmer setting is not just one simmer
setting, but provides a variable range of simmer settings. This variable
range of simmer settings allows you to adjust the flame height to achieve
the best simmer depending on the type and quantity of food being
simmered. It is this ability that makes the Vari-Simmer setting the most
accurate and trustworthy simmer on the market.
Surface Operation
Operation