Filter
Top Products
IMPORTANT–Read and Follow!
3
2
Table of Contents
• Before beginning, please read these
instructions completely and carefully.
• Do not remove permanently affixed labels,
warnings, or plates from product. This may
void the warranty.
• All local and national codes and ordinances
must be observed. Installation must
conform with local codes or in the absence
of codes, the National Fuel Gas Code ANSI
Z223.1 INFPA54.
• The installer must leave these instructions
with the consumer who should retain for
local inspector’s use and for future
reference.
In Canada: Installation must be in accordance
with the current CAN/CGA B149.1 & 2 Gas
Installation codes and/or local codes. Electrical
installation must be in accordance with the
current CSA C22.1 Canadian Electrical Codes
Part 1 and/or local codes.
In Massachusetts: All gas products must be
installed by a “Massachusetts” licensed
plumber or gasfitter. A “T” type handle
manual valve must be installed in the gas
supply line to the appliance.
Your safety and the safety of others is
very important.
We have provided many important safety
messages in this manual and on your
appliance. Always read and obey all
safety messages.
This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.
All safety messages will be preceded by
the safety alert symbol and the word
“DANGER,” “WARNING” or “CAUTION.”
These words mean:
Hazards or unsafe practices
which WILL result in severe personal
injury or death
DANGER
Hazards or unsafe practices
which COULD result in severe personal
injury or death
Hazards or unsafe practices which
COULD result in minor personal injury or
property damage.
All safety messages will identify the
hazard, tell you how to reduce the chance
of injury, and tell you what can happen if
the instructions are not followed.
WARNING
CAUTION
Warnings & Important Safety Instructions_____________________________________________________3
Dimensions __________________________________________________________________________________6
Specifications ________________________________________________________________________________8
Clearance Dimensions (Proximity to Cabinets) _______________________________________________10
Clearance Dimensions (Wood/Composite Overlay)___________________________________________11
Electrical & Gas Requirements ______________________________________________________________12
General Information ________________________________________________________________________14
Installation__________________________________________________________________________________15
Door Removal __________________________________________________________________________15
Leg Installation _________________________________________________________________________16
Electrical Connection (3 Wire)___________________________________________________________17
Electrical Connection (4 Wire)___________________________________________________________19
Leveling/Adjustments/Alignment________________________________________________________21
Anit-tip Device Installation ______________________________________________________________22
Connecting Gas & Electrical ____________________________________________________________23
Final Installation ________________________________________________________________________24
Door Replacement and Adjustment_____________________________________________________25
Final Preparation____________________________________________________________________________26
Performance Checklist ______________________________________________________________________26
Service & Registration ______________________________________________________________________27