Viking VEDO5302TBU Oven User Manual


 
19
18
Clocks and Timers
2. Use the up and down arrows to set the timer.
3. Press “SET” or “TIMER” to program the timer. (To cancel the
entry, press the “CLEAR” button on the left side of the control
panel.)
4. The timer is now set.
Cook Time and Stop Time
With the Viking oven, you can choose what times you need to
start and stop cooking your food. The Cook Time and Stop Time
functions allow you to program your preferences.
Here’s how it works:
It is 2:00 PM and you would like to have your dinner ready at 6:00
PM. By programming your oven with a two-hour cook time and a
6:00 PM stop time, your oven will delay cooking until 3:50 PM. At
3:50, the oven will begin preheating. At 4:00 PM, the oven will
begin its two-hour cook time.
Cook Time and Stop Time Facts:
Both ovens can be set individually for Cook Time and Stop Time
functions.
To Set Cook Time:
1. Select UPPER OVEN or LOWER OVEN.
2. Select an oven function and temperature before setting Cook
Time and Stop Time functions.
3. Press “COOK TIME” and the display will flash “0:00” and
“COOK TIME” will be lit below.
4. Use numeric keyboard to enter the amount of time needed for
cooking.
5. After the time is entered, the display will show “COOK TIME”
under the timer field. (To cancel the entry, press the “CLEAR”
button on the left side of the control panel.)
6. Press “SET” or “ENTER” if the cook time is correct. Cook time
is set.
NOTE: To cancel cook time during its cycle, press “COOK TIME”
and then press the “CLEAR” button on the left side of the oven
control. Cooking will continue if the oven is on.
To Set Stop Time:
1. Set Cook Time, following the steps provided in the previous
section.
2. Press “STOP TIME” and “STOP TIME” will be lit on the display.
3. Use numeric keyboard to enter the time you want to stop for
cooking.
4. After the time is entered, the display will flash the time. (To
cancel stop time, press the “CLEAR” button on the left side of
the control panel.)
5. Press “SET” or “STOP TIME” if the stop time is correct. Stop
time is set and will begin when the oven is preheated.
NOTE: Display will show Cook Time and Stop Time. If you
have entered a time incorrectly, you will hear a long beep
and the display will not change.
NOTE: To cancel stop time during its cycle, press “STOP TIME”
and then press the “CLEAR” button on the left side of the oven
control. Cooking will continue if the oven is on.
When Stop Time has been reached:
1. Your oven will sound three beeps, and “HOLD” will appear on
the display.
The oven will stay at 150º F in hold mode for two hours.
After two hours, the oven will sound four long beeps and
shut off.
2. Press “OFF” to turn off the oven manually.
Clocks and Timers
Press and Release Press and Hold
Time increases by
one minute
Time increases by
10 minutes
Time decreases by
one minute
Time decreases by
10 minutes
Programming Modes
Programming Modes