Filter
Top Products
3130
Programming Modes
Programming Modes
Convection Bake
This function is recommended for multi-rack baking. Foods can be
baked and roasted at the same time with minimal taste transfer,
even when different dishes are involved, such as cakes, fish, or
meat. To use convection bake, take the following steps:
1. Arrange the oven racks in the desired positions before heating
the oven.
2. Select “UPPER OVEN” or “LOWER OVEN.”
3. Set the Oven Function Selector to “CONV. BAKE.”
Temperature display flashes a preset temperature of 325º F.
4. Set the temperature using one of the following two methods:
a. Confirm preset temperature and press “SET” or “ENTER.”
The oven will begin Conv. Bake Preheat immediately.
OR
b. Change the temperature by typing the desired temperature
on the numeric keypad or using the up and down arrow
keys. Press “SET” or “ENTER” when finished. The oven will
begin Conv. Bake Preheat immediately.
During Convection Bake Preheat
The display will alternate between showing the set baking
temperature and the actual preheat temperature every 5 seconds.
When the set baking temperature is reached, one long beep will
sound and the display will show “CONV. BAKE.” Open oven
door and put food in oven.
To change set temperature during preheat stage:
Bake Modes
Press and Release
▲
Temperature increases by 5º F (or 2º C)
▼
Temperature decreases by 5º F (or 2º C)
Bake
This function is recommended for single-rack baking. Use this
setting for baking, roasting, and casseroles. To bake, follow these
steps:
1. Arrange the oven racks in the desired positions before heating
the oven.
2. Select “UPPER OVEN” or “LOWER OVEN.”
3. Set the Oven Function Selector to “BAKE.” Temperature
display flashes a preset temperature of 350º F.
4. Set the temperature using one of the following two methods:
a. Confirm preset temperature and press “SET” or “ENTER.”
The oven will begin Bake Preheat immediately.
OR
b. Change the temperature by typing the desired temperature
on the numeric keypad or using the up and down arrow
keys. Press “SET” or “ENTER” when finished. The oven will
begin Bake Preheat immediately.
During Bake Preheat
The display will alternate between showing the set baking
temperature and the actual preheat temperature every 5 seconds.
When the set baking temperature is reached, one long beep will
sound and the display will show “BAKE.” Open oven door and
put food in oven.
To change set temperature during preheat stage:
Bake Modes
Press and Release
▲
Temperature increases by 5º F (or 2º C)
▼
Temperature decreases by 5º F (or 2º C)