Filter
Top Products
Using the Chopper Attachment (Optional Attachment) VHB300CH
1. Place the rubber lid on the bottom of
the chopper bowl for stability.
2. Remove the chopper blade protective
cover and insert the blade into bowl.
3. Add small amounts of food to be
chopped.
4. Attach the chopper head to the bowl
and lock into place by turning to the
right.
5. Insert the motor housing into the top
of the lid.
6. Plug unit into proper electrical outlet.
7. Press the power button to activate
while holding both the bowl and the
motor body.
8. When chopping is complete remove
the motor housing by pressing the
two buttons on the bottom of the
motor housing. Remove lid and blade.
9. Make sure unit is off and unplugged from power outlet before
removing attachments.
Note:
Only use the chopper to chop small amounts of food such as meat,
cheese, onions, herbs, garlic and nuts. For better performance fill the
chopper approximately half full.
USEFUL TIPS
• Cut foods into smaller pieces for ease of chopping when using the
chopper attachment.
• Insert the hand blender into product to be processed before turning
the unit on to avoid splashing, especially with hot liquids. Also turn
the unit off before removal from the mixture.
• When blending on a cooking surface, turn the burner off before
blending in the saucepan. Failure to do this may cause harm to the
hand blender.
• For optimal blending allow the blender to be immersed at an
angle allowing air flow
, thus blending more consistently.
• Remove hard items from the mixture before blending.
6
c
hopper
h
ead
i
chopper
b
owl
i
chopper
blade
i
chopper
b
ase/lid
i
Chopper Attachment