Viking VRBD/VUBD 24" W. BEVERAGE DISPENSER Beverage Dispenser User Manual


 
USE/INSTALLATION
INSTRUCTIONS
VRBD/VUBD 24” W. BEVERAGE DISPENSER
Retain for Future Reference
VIKING
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
IMPORTANT - PLEASE READ AND FOLLOW
•Before beginning, please read these instructions completely and carefully.
•Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty.
•The installer should leave these instructions with the consumer for future reference.
GENERAL INFORMATION
1.
AALLWWAAYYSS
connect CO2 gas cylinder to reducing valve or regulator
2.
NNEEVVEERR
connect gas cylinder directly to keg.
3.
AALLWWAAYYSS
secure gas cylinder in upright position.
4.
AALLWWAAYYSS
keep gas cylinder away from heat.
5.
NNEEVVEERR
drop or throw gas cylinder.
6.
AALLWWAAYYSS
ventilate after CO2 leakage.
7. Gas cylinders should be stored in the coolest part of the room, preferably at 70
o
F., and securely fastened in the
upright position before the primary regulator is attached to the cylinder
BBEEEERR DDIISSPPEENNSSIINNGG KKIITT CCOONNSSIISSTTSS OOFF::
•Draft Tower Assembly
•Drain Hose
•Drain Container
•Keg Coupler
•Air Line with Clamps
•Single Gauge Regulator
•Filled 5 lb. CO
2
Cylinder
TTOOOOLLSS NNEEEEDDEEDD::
•Crescent Wrench
•Pliers
•Screwdriver
Draft Tower
Assy
Regulator
Regulator
Coupling Nut
Pressure
Gauge
Keg Coupler
(Sankey type
shown)
Drum Valve
Set Screw
Air
Line
Beer Line
CO
2
Tank
Toggle Shut
Off Valve
CO
2
CAN BE DANGEROUS
If it becomes difficult to breathe and
your head starts to ache, abnormal
concentrations of carbon dioxide may
be present in the area. Leave the
room immediately.
41006170 Rev. F