Filter
Top Products
9
TAPPING PROCEDURES
1. Align lug locks on tavern
head with lug housing in top
of key; insert tavern head.
2. Turn tavern head handle 1/4
turn clockwise; the tavern head
is now secured to keg.
3. Rotate on/off valve handle 1/4 turn
clockwise to open beer and CO
2
ports in keg. The keg is now tapped.
TWIN PROBE KEG TAPS
Insert Probes
Screw Tavern Knob Hand Tight
Turn on Pressure and Draw Beer
CCOO
22
CCyylliinnddeerrss ((IItt iiss rreeccoommmmeennddeedd ttoo hhaavvee aann eexxttrraa ccyylliinnddeerr oonn hhaanndd))
CCyylliinnddeerr DDiiaa.. HHtt.. EEmmppttyy WWeeiigghhtt FFuullll WWeeiigghhtt
55 llbbss.. 55”” 1177--11//22”” 1122--11//22 llbbss.. 1177--11//22 llbbss..
SANKEY TYPE KEG
COUPLER
(Taps all Coors
TM
, Miller
TM
and Budweiser
TM
kegs)
There are two keg sizes:
1) the quarter barrel containing 7 3/4 gallons or
approximately 3 1/2 cases of 12 ounce bottles or
2) the half barrel containing 15 1/2 gallons or
approximately 7 cases.
APPROXIMATE MEASUREMENTS REQUIRED TO TAP
MOST KEGS
Quarter Barrel Half Barrel
Height 17 - 21 inches 25 - 29 inches
Diameter 16 - 20 inches 18 - 22 inches
Weight 80 - 85 pounds 160 - 180 pounds