Filter
Top Products
- 10 -
• Plug the cooling unit in receptacle.
• Plug the wine cellar.
2. VINO3500-8500HZD ROOM INSTALLATION
1. Cut a rectangular opening at the wine room wall as illustrated. The
dimensions of the opening shall be 1/4” larger than the width and height of
the unit.
2. If top exhaust, cut another rectangular opening at the top of the cabinet to
the length and width of the top exhaust.
3. Construct a shelf as shown. The shelf must be capable of supporting the
weight of the unit.
4. Place the unit on the shelf with the back of unit flush with the outside of
the wall.
5. Attach the grille to the outside wall with screws.
6. Seal the area between the cooling unit and opening with a high quality
weather stripping or polyurethane spray foam and cover with molding.
7. If top exhaust, place another gaskets along the top exhaust at the top of
the cooling unit (see Fig.2.9).
8. Attach the molding to the wall not the unit.
9. Plug the unit into a properly grounded and dedicated outlet of adequate
capacity.
Fig. 2.8 ROOM INSTALLATION