Vinotemp VT12TEDS2Z Refrigerator User Manual


 
power board. Please ensure that the appliance is plugged directly into the
electrical outlet.
When positioning the wine cooler, ensure that there is at least a 5cm (2
inch) clearance at the sides and a 10cm (4 inch) clearance at the back of
the cooler as this is the main outlet for heat. This will allow for adequate
ventilation.
Unit must be freestanding; cannot be used as a built-in cooler.
This cooler is designed to store wine bottles. It is not intended for food.
Do not place hot food or drink into the wine cooler before it cools down to
room temperature.
Close the cooler door immediately after putting in any items so the inside
temperature will not rise dramatically.
Keep appliance away from any heat source or direct sunlight.
For stability, the appliance must be placed on a solid, flat surface. It
should not be laid on any soft material.
Do not place any other appliance on top of the wine cooler.
The wine cooler is an electrical appliance. To avoid injury or death from
electrical shock, do not operate the wire cooler with wet hands, while
standing on a wet surface or while standing in water.
Do not use outdoors or in wet conditions.
When positioned or if moving the appliance, ensure that it is not set
horizontally, positioned at an angle of more than 45°, or turned upside
down.
Never lift or carry the wine cooler by the cord.
Keep the cord away from heated surfaces.
This wine cooler is for household use only. Any other use will void the
warranty.
Do not plug into the power socket before set up is completed.
Always unplug an appliance from outlet when not in use. Never pull cord
to remove plug from outlet. Grasp plug and pull to disconnect.
An empty cooler can be a dangerous attraction to children. If disposing of
the cooler, remove gaskets, latches, lids or the entire door from your
unused appliance, or take other action to ensure the cooler is harmless.
11
17621 South Susana Road, Rancho Dominguez, California 90221
info@vinotemp.com