Filter
Top Products
PROBLEMS WITH YOUR WINE CELLAR
You can solve many common wine cellar problems easily, saving you the
cost of a possible service call. Try the suggestion below to see if you can
solve the problem before contacting Vinotemp at info@vinotemp.com
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSE
Wine cellar does not
operate
• Check if unit is not plugged in.
• Check if using wrong voltage.
• The circuit breaker tripped.
• Blown fuse.
Wine cellar is not
cold enough
• Check the temperature control setting, external
environment may require a cooler setting.
• The door is open too often.
• The door is not closed completely.
• The door seal does not seal properly.
• The wine cellar does not have the correct
clearance at the back and two sides.
Light does not work • Call the service center.
Vibrations • Check to see that the wine cellar is level.
Wine cellar seems to
make too much
noise
• The wine cellar is not level.
• Check the fans inside the cabinet and at the back
of the unit
Door will not close
properly
• The wine cellar is not level.
• The doors were reversed and not properly
installed.
• The seal is weak.
• The shelves are out of position.
Temperature LED
does not display
• Main control board does not work.
• Temperature controller problem.
• There is some problem with the plug (no power
supply).
Temperature LED
display error
• Temperature sensor is cut off.
Buttons are not
functional
• Temperature controller panel is damaged.
Supply cord is
damaged
• Cord must be replaced by the manufacturer or its
service agent or a similarly qualified person in
13
17621 South Susana Road, Rancho Dominguez, California 90221
info@vinotemp.com