Filter
Top Products
OPERATING INSTRUCTIONS
1. Gently place/slide the racks in the cooler.
2. Determine the best temperature setting to use.
3. Place bottles and cans inside the cooler.
4. Plug the power cord into a standard electrical outlet.
5. Limit the frequency of opening the door to conserve energy and
maintain proper storage temperature.
6. You can turn the interior light on and off by touching the button
labeled “Light” on the front control panel.
Important: When using the cooler for the first time, allow at least 24
hours for the internal temperature to adjust properly. Make sure there are
at least 6 to 12 bottles in the unit.
TEMPERATURE CONTROL
Important: In order to operate efficiently, this product should be
in an environment with an ambient temperature of less than 90°F
(32°C).
Temperature preset:
For your convenience, the beverage cooler is programmed at storing
temperature. The temperature pre-set by the manufacturer is 48°F (9°C).
Setting the temperature control (manually):
To manually adjust the temperature, simply press the button on the
control panel to decrease the temperature and the button to increase
the temperature in 1 degree increments inside the cooler. The
temperature range is from 40°F (4°C) to 65°F (18°C).
When the cabinet temperature is too low the LED will display “LL”. When
the temperature is too high it will display “HH”. The “ER” display shows
when there has been a power disruption.
7
17621 South Susana Road, Rancho Dominguez, California 90221
info@vinotemp.com