Filter
Top Products
14
OPERATING INSTRUCTIONS
Dry Blade Container
If purchased, your dry blade container should only be used for hard, dry materials such as grain, and for
kneading dough.
1.
Make sure that the Variable Speed Dial is set to 1.
2.
Securely fasten the 2-Part. Always use the complete 2-Part lid when blending (unless the tamper is
inserted through the lid plug opening).
3.
With the motor off, set the dry blade container on the motor base by aligning it over the centering pad.
Never attempt to put a container on an operating motor base or to operate a motor base without a
container properly in place.
4. Start with the On/Off Switch in the On position. Always start your machine on variable speed 1.
Activate the machine by lifting up the Start/Stop Switch to the Start ( ) position and slowly increase the
variable speed to the desired speed.
5.
After turning off the machine, wait until the blades completely stop before removing the lid or container
from the motor base.
6.
Due to the machine’s speed and the sometimes-short processing times, count your time carefully to
avoid over-processing
.
7.
Grinding dry material for more than two minutes could damage your machine. Regular use may result in
cosmetic marring of the container and cause the blades to become dull over time
.
8.
Grinding some herbs may release volatile oils, causing the container to discolor permanently. Others
have strong odors that may linger in the container, affecting the flavor of other foods. The grinding of
some herbs and spices may also cause the blade to dull over time, or the container to crack.