Vita-Mix CREATIONS GALAXY CLASS Blender User Manual


 
10
CAUTION
Contents Will Be Hot.
CAUTION
Contents Will Be Hot.
Handle and process with care. Attach plug
to lid. Attach lid to container.
CAUTION
Contents Will Be Hot.
CAUTION
Contents Will Be Hot.
Handle and process with care. Attach plug
to lid. Attach lid to container.
CAUTION
Contents Will Be Hot.
CAUTION
Contents Will Be Hot.
Handle and process with care. Attach plug
to lid. Attach lid to container.
Never Start On High Speed With Hot
Liquids to Avoid Possible Burns.
Use caution; escaping steam or
splashes may scald.
Lock the lid. This will prevent
expansion from blowing it o when
the machine is turned on.
Start on Variable 1, slowly increase
to 10, then switch to High speed.
CONTROL PANEL
1. On/Off Switch: Push up to turn On (|). Push down to turn Off (O).
2. High/Variable Switch: High
( )
is the fastest speed available. Switch to Variable ( ) to activate
all of the lower variable speeds.
Always make sure that the High/Variable Switch is set to Variable ( ) before pushing the On/Off
Switch to the On (|) position. Do not start your machine on High
( )
speed.
3. Variable Speed Dial: Selects many speed settings. It is active only when the High/Variable Switch
is set in the Variable ( ) position.
1
2
3