Filter
Top Products
6
Lid Plug
2-Part Lid
Lid Flaps
Container
Blade
Assembly
Retainer Nut
Centering Pad
Drive Socket
Control Panel
Motor Base
Feet
Tamper
2-Part Lid: Your new machine has our latest
lid design. It is easy to put on and take o,
and easy to clean. Always use the lid and the
lid plug when the machine is in operation.
CAUTION: Lids are not inter-
changeable between dierent
container styles, types and sizes.
New lids should not be forced into place.
For ease in using a new lid, lightly coat the
rim and seal below the rim with vegetable
oil. Wipe away excess. Snap the lid onto the
container and leave in place for a few minutes.
Once the lid has been left on the container it
will be much easier to lock or remove, and will
not require the use of vegetable oil.
Lid Plug: Insert through the lid and secure by
turning clockwise. Remove the lid plug to use
the tamper or add ingredients.
To Lock the Lid in Place:
1. Position lid on container with lid
flaps midway between the spout and
the handle.
2. Push the lid onto the container until it
locks in place.
3. The lid must always be secured when
processing, especially hot liquids that
may scald.
PARTS AND FEATURES