Filter
Top Products
7
Note:
The thermal protector shuts the motor off to protect it from overheating. To restart,
wait for motor to cool down with the power OFF (up to 30 minutes). When this happens,
review your processing techniques and your instructions. Your recipes may be too thick
or have too much material in them.
Cooling may be quickened by placing the motor base in a refrigerator or a cool spot.
Unplug first. To speed up the process try circulating the air with a vacuum or fan aimed
at the bottom of the base. If the motor seems to be over heating (and the thermal
overload protector has not turned the machine OFF), remove the container from the
base. Set the timer for 20 seconds. Turn the machine ON and let the machine run for
20 seconds. Repeat this step 3 times for a total of 1 minute.
6. To use the PULSE switch on the Drink Machine MP blender: Press ON/OFF switch
to ON. With the container on the motor base depress the PULSE switch. Release the
switch to turn off the motor.