Filter
Top Products
7
Two-Piece Lid
Compact 32 oz. / 0.9 Ltr. Polycarbonate/
Stackable Container
The two-piece lid is easy to clean and easy
to put on, take off and seal.
• The lid has a continuous rim which fits tightly
inside the container. Push lid into container
until the side latches are snapped under the
container lip.
• To remove lid, pull up gently on the side lid
latches.
• To secure lid plug: Position the lid plug over
the lid and align either of the position indicator
tabs with one of the unlocked icons. Press
the plug into the lid and turn until an indicator
tab is aligned with a locked icon. (Turn the lid
over to be sure that plug is properly locked –
the locking feet must be seated into the lid
locking notches.) The bottom surface of the
plug should be snug against the top of the lid.
• The lid plug can be removed when using the
accelerator tool or adding ingredients. Turn
plug to an unlocked icon to remove.
Two-Piece Lid
48 oz. / 1.4 Ltr. Polycarbonate/Stackable
Container
The two-piece lid is easy to clean and easy to put
on, take off and seal.
• Push lid into container until the side latches are
snapped under container lip. (See F(1) - F(3).)
• To remove fully latched lid, squeeze tabs
together on both sides of the container, pull
upward and off.
• The lid plug can be removed when using the
accelerator tool. Twist plug to fasten or remove.
NOTE: Brand new lids may be a little stif
f.
This is temporary. To make new lids easier
to insert and remove, rub a light coating of cooking oil around rim where it seals. Place
it in container for several minutes, remove and lightly wipe oil of
f lid.
Figure C
Figure F
6
Two-Piece Lid
64 oz. / 2.0 Ltr. Polycarbonate Container
The two-piece lid is easy to clean and easy
to put on and take off.
• The lid has a continuous rim which latches
inside the container tabs. Push one side of
the rim under one tab, and with the heel of
your hands push down, over the opposite tab,
to snap lid into position.
• To remove lid, place hands around the lid,
pressing thumbs above one of the container
tabs. Push in and lift off.
• To secure lid plug: Position the lid plug over
the lid and align either of the position indicator
tabs with an unlocked icon. Press the plug into
the lid and turn until an indicator tab is aligned
with one of the locked icons. (Turn the lid over
to be sure that plug is properly locked – the
locking feet must be seated into the lid locking
notches.) The bottom surface of the plug
should be snug against the top of the lid.
• The lid plug can be removed when using the
accelerator tool or adding ingredients. Turn
plug to an unlocked icon to remove.
One-Piece Lid
(Optional)
64 oz. / 2.0 Ltr. Polycarbonate Container
The one-piece lid is easy to put on or take off,
and to clean, for quick operation.
• There is no latch on this lid. Simply hold the
lid on when starting.
• Add ingredients through port in top.
CAUTION: Do not use non-latching one-piece lid
when processing hot ingredients. Not for use with
an accelerator tool.
NOTE: Vita-Mix
®
lids come in several different styles. Please be sure you are following
the instructions for your style of lid.
F(1) Unsealed/Unlatched F(2) Sealed F(3) Fully Latched
Lid resting on container
using hand to stabilize.
Lid pushed into container.
Side latches are not under
container lip.
Side latches are snapped
under container lip.
Always lock lid when processing hot
liquids. See warning on page 3.
Press in above
container tab
to remove lid
Position
Indicator Tab
Rim
Container
Tab
Unlock
Lock
Figure B
Top view of lid showing Locking Icons.
Figure A
Position
Indicator Tab
Always lock lid when processing hot
liquids. See warning on page 3.
Press in above
container tab
to remove lid
Rim
Side lid
latches
Figure E
Top view of lid showing Locking Icons.
Figure D
Unlock
Lock